Advertisement-overview

Automatic single-head guillotine WSG1 Allows you to speed up the process of cutting accessories by 2.5 times by automating the equipment. The automatic single-head guillotine makes work much easier, thereby increasing the speed of cutting fittings by 2.5 times. In many industries, the process of ...

Station for drilling holes for posts in the WS401 frame Drilling occurs in fully automatic mode, which allows you to increase the speed of drilling holes by three times. The single-head station for drilling holes for the post in the frame allows to increase the accuracy and speed of production, ...

Double head station for drilling holes for posts in frame WS402 The device is used for quick and high-precision drilling of holes for the central screw for fastening the impost in frames. This station allows you to completely avoid errors when drilling holes for the mechanical connection of the ...

Automatic station for cutting window sills WS1001 The unique center for cutting window sills largely automates this process. The operator only needs to place the window sill on the machine and remove the cut window sill. The gripper feeds the window sill to the saw and makes a cut of the require ...

Automatic positioner for mounting strikers WS301 The equipment is designed to install fittings for the frame and post before welding. Thanks to the automatic operation of the device, there is not only an increase in performance and optimization work, but also an improvement in the quality of the ...

Distance saw with digital measuring system WS1080 Due to the saw for cutting the spacer frame. Sensors for automatic transition to the next size enable production speeds to be six times higher. The distance saw with a digital measuring system allows you to minimize the number of errors and signi ...

Automatic measuring stop WSU 3000 By optimizing the cutting of linear material, the number of errors is reduced by 20%. The automatic measuring stop minimizes the error rate and significantly speeds up the determination of the length and the sawn-off material for the selected profile type. The a ...

Automatic guillotine for cutting metal WS 7050 Do you want to increase the stiffness of sharp reinforcement by 2 to 4 times? The equipment is intended for cutting metal. This station has approved reinforcement members parallel to the deckhouse. Replaces a person. Production increases the speed a ...

Drilling center for door hinges in frames and sashes with metal WS503 Automation makes it possible to reduce the influence of the human factor in this production area and reduce the number of errors by 5%. The center for drilling holes for door hinges in metal frames and sashes is intended for d ...

Automatic double head screwdriver WS208 The automatic two-stage switch can work in two operating modes. Also included in the test is the switch position: white and laminated. A simple and easy to use holder for applying wallpaper that undoubtedly reflects the quality of the product. Automating t ...

Automatic stand for cutting sandwich panels WS8800 The automatic stand for cutting sandwich panels has software control, which allows you to get the required number of elements of a given size in the shortest possible time without errors. The stand automates the cutting process: cut cards, place ...

Sash hole milling center for lock and handle with metal WS707 The quality of the technology used allows to increase the production speed by 3 times. Milling center for lock and handle holes in the sash allows you to forget about the use of machining centers and manual labor. The use of quality t ...

Automatic double-head guillotine WS G3 In many factories, the assembly process of fittings is still not automated and as a result the operator spends a lot of time searching for fittings and cutting them to size. Automatic double-headed guillotine allows you to greatly simplify the work, thereby ...

ALU stripper with cloth for 200 cm deep ovens New Product description Condition: New Material of puller: aluminum Suitable for 200 cm deep ovens With side fastening Dimensions of the puller: width 58 cm, length 240 cm, height 5.6 cm Dimensions of the cloth: width 56 cm, total length 470 cm See p ...

Pulling devices for automatic loaders oven DAUB HEUFT MIWE Product description Condition: used, functional, bakery condition - please clean thoroughly before use Material: stainless steel, heavy quality, very robust Automatic loading of the pullers for Daub/Heuft ovens Cross puller for Daub/Heuf ...

Battering and stirring machine Rego SM4 Description A used Rego SM4 batter and stirring machine is currently for sale and immediately available in our warehouse. Manufacturer: RMT Rego Maschinentechnologie GmbH Type: SM4 Condition: overhauled For max. 40 liters Revised and repainted With automat ...

Stop and mixer Rego SM2 Description A used stop and stirring machine Rego SM2 revised and repainted. Manufacturer: Rico-Rego GmbH Maschinenbau Type: SM2 Condition: overhauled For max. 20 liters With automatic operation via timer Manual run Stir and beat Newly painted Many parts have been renewed

Boku SK 240 AS CS spiral kneader completely overhauled Description Used Boku spiral kneader type SP 240 AS CS with digital control. With 2 stainless steel boilers on trolleys. The kneader is suitable for a maximum of 240 kg of dough or a maximum of 150 kg of flour. The machine has 2 speeds and 2 ...

Spiral kneader Diosna W 240 A Description Spiral kneader from Diosna Model W 240 A with 2 stainless steel bowls in good condition. The machine is with new Omron control. Manufacturer: Diosna Dierks & Söhne GmbH Type: W 240 A Condition: overhauled For max. 240 kg dough capacity With 2 st ...

Spiral kneader Kemper SP 150 AL completely overhauled Description A completely overhauled Kemper SP 150 AL spiral kneader with 2 extendable stainless steel bowls. The machine has been completely overhauled and repainted. The machine's complete electronics with control cabinet, timers, buttons an ...